Multifunctional Acrylic Polymers with Enhanced Adhesive Property Serving as Excellent Edge Encapsulant for Stable Optoelectronic Devices.

Pendant groups in acrylic adhesive polymers (Ads) have a profound influence on adhesive and cohesive properties and additionally on encapsulant application. However, a systematic investigation to assess the impact of the pendant groups' length and bulkiness is rare, and there is not even a single report on applying Ads as interfacial adhesion promotors and encapsulation materials simultaneously. Herein, we have developed a series of multifunctional methacrylic polymers, namely, R-co-Ads, with varying pendant length and bulkiness (R = methyl (C1), ethyl (C2), propyl (C3), butyl (C4), pentyl (C5), hexyl (C6), isobutyl (iC4), and 2-ethylhexyl (2EH)). The adhesion-related experimental results reveal that R-co-Ads have high transparency, strong adhesion strength to the various contact surfaces, and a fast cure speed. In particular, C1-co-Ad shows a superior adhesion performance with an improved cross-cut index of 4B and a shear bonding strength of 1.56 MPa. We also have adopted C1-co-Ad for encapsulation of various emerging optoelectronic applications (e.g., perovskite solar cell-, charge transport-, and conductivity-related characteristics), demonstrating its excellent edge encapsulant served to improve the device stability against ambient air conditions. Our study establishes the structure-adhesion-surface relationships, advancing the better design of adhesives and encapsulants for various research fields.

Removal of methylene blue by acrylic polymer adsorbents loaded with magnetic iron manganese oxides: Synthesis, characterization, and adsorption mechanisms.

Dyes pose significant risks for aquatic environments and biological health in general owing to their non-biodegradable nature, carcinogenicity, and toxicity. The effective treatment of dye wastewater has become an important research topic. In this study, acrylic polymers (AP) loaded with magnetic iron manganese oxides (MIMO) (AP/MIMO) were prepared and used for the first time for the adsorption of methylene blue (MB). Carbon in AP/MIMO exists predominantly in the C-H and C-C forms, with its content reaching 50.7%. Oxygen and nitrogen in AP/MIMO exist mainly in the -CO- and -N-C forms, with contents of up to 41.5% and 73.3%, respectively. MB removal by AP/MIMO was consistent with the pseudo-second-order kinetic model (R2 = 0.99), equilibrium was achieved within 20 min, and the highest MB capacity of 2611.23 mg g-1 was predicted by the Langmuir isotherm model (R2 = 0.91-0.94). AP/MIMO exhibited excellent MB adsorption performance in the pH range of 4-10, with a removal efficiency higher than 99.0% (MB = 100 mL 1000 mg L-1; AP/MIMO = 50 mg). Thermodynamic indicators, such as positive entropy (ΔS0; 98.30 J⋅mol-1⋅K-1), negative Gibbs free energy (ΔG0; -29.40, -28.50, and -27.50 KJ⋅mol-1), and positive enthalpy (ΔH0; 2.30 KJ⋅mol-1), demonstrated that MB removal by AP/MIMO was autonomous, favorable, and endothermic. In addition, the integration of experimental results and theoretical calculations verified that electrostatic interactions were the primary mechanism for MB adsorption at carboxyl sites on AP/MIMO. The total interaction energy between AP and MB was -310.43 kJ⋅mol-1, and the electrostatic effect had a decisive contribution to the MB adsorption, with a value of up to -341.06 kJ⋅mol-1. AP and MB were most likely bound by -COO and S atoms. Overall, AP/MIMO exhibits high adsorption capacity and shows potential as a high-performance magnetic polymer for MB removal.

Ultrabright Acrylic Polymers with Tunable Fluorescence Enabled by Imprisoning Single TICT Probe.

Bright and colorful fluorescent polymers are ideal materials for a variety of applications. Although polymers could be made fluorescent by physical doping or chemical binding of fluorescent units, it is a great challenge to get colorful and highly emissive polymers with a single fluorophore. Here the development of a general and facile method to synthesize ultrabright and colorful polymers using a single twisted intramolecular charge transfer (TICT) probe is reported. By incorporating polymerizable, highly fluorescent, and environmental sensitive TICT probe, a series of colorful acrylic polymers (emission from 481 to 543 nm) with almost 100% fluorescence quantum yields are prepared. Like the solvatochromic effect, functional groups within side chains of acrylic polymers (including alkyl chain, tetrahydrofurfuryl group, and hydroxyl group) provide varied environmental polarity for the incorporated fluorophore, resulting in a series of colorful polymeric materials. Benefiting from the excellent photophysical properties, the polymers show great potential in encryption, cultural relics protection, white light-emitting diode bulb making, and fingerprint identification.

WAYS OF IMPROVING THE QUALITY OF PROSTHETICS OF MILITARY PERSONNEL.

OBJECTIVE: The aim: Justify the choice of the construction material of dental prostheses, taking into account the clinical picture and concomitant diseases in military personnel and the study of the dynamics of military personnel seeking orthopedic dental care. PATIENTS AND METHODS: Materials and methods: 185 military personnel were examined and fitted with prosthetics in the period from March 2022 to March 2023. Methods: general clinical, content analysis, bibliosemantic, medical and statistical. RESULTS: Results: All patients who came to us for dental care had previously been replaced with fixed metal structures. Of them, 121 people indicated problems related to the use of metal prostheses. From these patients, a risk group of intolerance to prosthesis materials was formed and a search was made for base materials that would be biologically indifferent. For the manufacture of partial removable prostheses, we chose the basic thermoplastic material Acron, manufactured by Roko (Poland), which has high biocompatibility with the tissues of the prosthetic bed. When choosing the structures of partial removable prostheses in patients with various defects of the dentition, we were guided by a small number of clinical visits, which is relevant for military personnel who are on rotation and treated in the hospital. CONCLUSION: Conclusions: Our careful selection of structural material made it possible to prevent complications and produce high-quality removable prostheses in a short period of time. An analysis of the reasons for orthopedic care showed low awareness of the servicemen regarding the need for timely orthopedic treatment.

Silver Nanoparticles as Antifungal Agents in Acrylic Latexes: Influence of the Initiator Type on Nanoparticle Incorporation and Aureobasidium pullulans Resistance.

Discoloration of wood coatings due to fungal growth negatively affects the aesthetic properties of the coatings, and new ways to control fungal growth on coatings are needed. For this reason, silver nanoparticles (AgNPs) have been incorporated in acrylic latexes as antifungal agents. Using miniemulsion polymerization, latexes were prepared with two types of initiators (hydrophilic and hydrophobic) to assess the influence of the initiator type on AgNPs dispersion, both within the latex particles and the dry film. In addition, the impact of NP dispersion on resistance to black-stain fungi (Aureobasidium pullulans) was also evaluated. Inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis indicates that acrylic latexes prepared with azobisisobutyronitrile (AIBN) as the initiator contain more AgNPs than those prepared with potassium persulfate (KPS). Cryo-TEM and SEM analyses show that the distribution of the AgNPs within the polymer particles is influenced by the nature of the initiator. When AIBN, a hydrophobic initiator, is used, the AgNPs appear to be closer to the surface of the polymer particles and more evenly distributed. However, the antifungal efficiency of the AgNPs-embedded latexes against A. pullulans is found to be higher when KPS is used, despite this initiator leading to a smaller amount of incorporated AgNPs and a less uniform dispersion of the nanoparticles.

The Use of Acrylate Polymers in Dentistry.

The manuscript aimed to review the types of acrylate polymers used in dentistry, as well as their chemical, physical, mechanical, and biological properties. Regarding their consistency and purpose, dental acrylate polymers are divided into hard (brittle), which includes acrylates for the production of plate denture bases, obturator prostheses, epitheses and maxillofacial prostheses, their repairs and lining, and soft (flexible), which are used for lining denture bases in special indications. Concerning the composition and method of polymerization initiation, polymers for the production of denture bases are divided into four types: heat-, cold-, light-, and microwave-polymerized. CAD/CAM acrylate dentures are made from factory blocks of dental acrylates and show optimal mechanical and physical properties, undoubtedly better monomer polymerization and thus biocompatibility, and stability of the shape and colour of the base and dentures. Regardless of the number of advantages that these polymers have to offer, they also exhibit certain disadvantages. Technological development enables the enhancement of all acrylate properties to respond better to the demands of the profession. Special attention should be paid to improving the biological characteristics of acrylate polymers, due to reported adverse reactions of patients and dental staff to potentially toxic substances released during their preparation and use.

The Impact of Particulate Matters and Nanoparticles on Thermoplastic Polymer Coatings and Paint Layers.

This article attempts to highlight a phenomenon that more or less permanently damages emulsion paint layers, the surfaces of which remain sufficiently permeable for dust particles to become permanently anchored there; when the particles are nanometric, this can cause a permanent change in appearance. Based on scientific documents, empirical observations, laboratory analyses, case studies, and reconstructions of characteristic pictorial layers, this paper aims to highlight the medium- and long-term risks that alter these surfaces, in order to realize strategies for better prevention. The physico-chemical nature of these vulnerable materials will be discussed first, followed by the dust's involvement; finally, the topic will be illustrated through concrete examples, with photos taken using digital, 4 K optical, and Scanning Electron Microscope equipment (SEM), in order to show how the problem of dust particle accumulation impacts even the most contemporary works of art.

Design and preparation of nanocomposite acrylate coating agents for binder-free dry coating of 100 µm-sized drug-containing particles and their coating performance.

For binder-free dry particulate coating to prepare controlled-release micron-sized particles, we designed nanocomposite coating agents with the intention to form a core-shell structure composed of two types of acrylic polymers with different glass transition temperatures (Tg) and evaluated their coating performance. A series of nanocomposite acrylic latexes synthesized by emulsion polymerization was freeze-dried after salting-out to create the powder form. An ion-exchange resin loaded with diclofenac sodium (DS, a model drug) (IER-DS) with a median diameter of approximately 100 µm was used as the core particle. Dry coating of the IER-DS with nanocomposite coating agents was carried out using a laboratory-made coating apparatus assisted with mild-intensity vibration and zirconia bead impaction. The coated particles were cured by heating at a temperature 20 °C higher than the Tg for 12 h to complete the film-forming process. It was found that the highest coating efficiency (more than 70%) and a remarkably prolonged release period of the drug (the time required for 50% release reached approximately 12 h) could be achieved when nanocomposite coating agents with a soft polymeric core (Tg = 30 °C) and a hard polymeric shell (Tg = 80 °C) were applied. In contrast, nanocomposite coating agents with a combination of a hard polymeric core and a soft polymeric shell resulted in lower coating efficiency. These results demonstrate that nanocomposite polymeric coating agents composed of a soft core and a hard shell are effective for the production of drug-loaded microparticles with a prolonged release function by a binder-free dry-coating process.

Calcitic-based stones protection by a low-fluorine modified methacrylic coating.

Atmospheric pollutants, such as NOx, SO2, and particulate matter, together with water percolation inside the stone pores, represent the main causes of cultural heritage decay. In order to avoid these undesired phenomena, the application of protective coatings represents a reliable solution. In this context, the present study focused on the synthesis of low-fluorine content methacrylic-based (MMA) polymeric resins characterized by seven F atoms (namely F7 monomer) in the lateral chains. Four different percentages (1.0, 2.5, 5.0, and 10.0%) of the present monomer were adopted to obtain a final polymeric structure showing the desired hydrophobicity, processability, and structural and thermal stability (even after accelerated UV aging tests). MMA_F7(1.0) seemed to be the optimal one; therefore, it was further applied onto Candoglia marble. Specifically, the treated substrates showed good surface hydrophobicity, water repellency, and water vapor transpirability. No color variation was observed even after a 1.5-year exposure in a real polluted environment (Monza Cathedral). Interestingly, the application of this coating hindered the atmospheric nitrates penetration inside the stones and, at the same time, it limited the sulfates (gypsum) formation, thus revealing a very promising marbles protection resin.

Nanodispersions of TiO2 in Water for Removing Acrylic Films Used in Conservation.

The influence of a nanodispersion of TiO2 in water (nanoparticle size: 40 nm, polydispersity index: 0.25), brushed on a Paraloid film and subjected to UV-Vis irradiation was evaluated. The TiO2 nanodispersions showed a tendency to reduce the molecular weight of Paraloid due to its photocatalytic properties. FTIR and GPC analyses and SEM images suggested the degradation of the polymer, while chromatic variations of the films were scarcely detected. This study is very remarkable in the perspective of using this material for the removal of polymeric films used in conservation.

Current status on the biodegradability of acrylic polymers: microorganisms, enzymes and metabolic pathways involved.

Acrylic polymers (AP) are a diverse group of materials with broad applications, frequent use, and increasing demand. Some of the most used AP are polyacrylamide, polyacrylic acid, polymethyl methacrylates, and polyacrylonitrile. Although no information for the production of all AP types is published, data for the most used AP is around 9 MT/year, which gives an idea of the amount of waste that can be generated after products' lifecycles. After its lifecycle ends, the fate of an AP product will depend on its chemical structure, the environmental setting where it was used, and the regulations for plastic waste management existing in the different countries. Even though recycling is the best fate for plastic polymer wastes, few AP can be recycled, and most of them end up in landfills. Because of the pollution crisis the planet is immersed, setting regulations and developing technological strategies for plastic waste management are urgent. In this regard, biotechnological approaches, where microbial activity is involved, could be attractive eco-friendly strategies. This mini-review describes the broad AP diversity, their properties and uses, and the factors affecting their biodegradability, underlining the importance of standardizing biodegradation quantification techniques. We also describe the enzymes and metabolic pathways that microorganisms display to attack AP chemical structure and predict some biochemical reactions that could account for quaternary carbon-containing AP biodegradation. Finally, we analyze strategies to increase AP biodegradability and stress the need for more studies on AP biodegradation and developing stricter legislation for AP use and waste control. KEY POINTS: • Acrylic polymers (AP) are a diverse and extensively used group of compounds. • The environmental fates and health effects of AP waste are not completely known. • Microorganisms and enzymes involved in AP degradation have been identified. • More biodegradation studies are needed to develop AP biotechnological treatments.

Acrylic Polymers Containing a Nickel Salphen Complex: An Approach to Supramolecular and Macromolecular Systems.

The synthesis, characterization and crystallographic analysis is reported of a new Nickel Salphen complex and its radical copolymerization with n-butyl acrylate and methyl methacrylate to produce novel host macromolecules with tunable association against guest anions. Spectrophotometric titrations of the complex and of the polymers revealed that a supramolecular regulation of guest-binding accessibility was enabled by the number of Ni-Salphen units per chain. The latter content in turn, determined the chain size and molecular weight uniformity upon polymerization, and likely increased the strength in interchain/intrachain non-covalent interactions over the nickel center and the acrylic domains. The study also showed that incorporation of the monomer into the acrylic polymer backbone opened the possibility for the nickel binding site to gain access to host:guest stoichiometric discrimination, switching from 1 : 1 (major) and 1 : 2 (minor) both coexisting for the host when in the free form, to mostly 1 : 2 when in the polymerized version.

Comprehensive review of the role of acrylic acid derivative polymers in floating drug delivery system.

In the development of drug delivery systems, an oral drug delivery system is the preferred route of drug administration. Many components play an important role in developing a drug delivery system. Amongst those components, polymers have evolved with these systems. Macromolecule compounds consisting of many monomer units which are joined to each other by different bonds are known as polymers. For drugs that are absorbed primarily in the upper gastrointestinal tract, floating drug delivery systems offer an additional advantage. The purpose behind this review was to focus on different types of floating drug delivery systems and different types of polymers used in floating drug delivery systems, focusing on acrylic acid derivatives and their applications. In this review, the main emphasis is on acrylic acid derivative polymers, their formulation and grades, and various patents on these types of polymers. Based on the literature survey, mainly 2 types of polymers are used in this drug delivery system; i.e., natural and synthetic. Examples of natural polymers are xanthan gum, guar gum or chitosan, and synthetic polymers include acrylic acid derivatives and hydroxylpropyl methylcellulose (HPMC). Eudragit and Carbopol are the most widely used acrylic acid derivatives.

Acid monomer analysis in waterborne polymer systems by targeted labeling of carboxylic acid functionality, followed by pyrolysis - gas chromatography.

Pyrolysis - gas chromatography - (PyGC) is a common method to analyse the composition of natural and synthetic resins. The analysis of acid functionality in, for example, waterborne polyacrylates and polyurethanes polymers has proven to be difficult due to solubility issues, inter- and intramolecular interaction effects, lack of detectability in chromatographic analysis, and lack of thermal stability. Conventional analytical techniques, such as PyGC, cannot be used for the direct detection and identification of acidic monomers, due to thermal rearrangements that take place during pyrolysis. To circumvent this, the carboxylic acid groups are protected prior to thermal treatment by reaction with 2-bromoacetophenone. Reaction conditions are investigated and optimised wrt. conversion measurements. The aproach is applied to waterborne polyacryalates and the results are discussed. This approach enables identification and (semi)quantitative analysis of different acid functionalities in waterborne polymers by PyGC.

3D printing of drug-loaded gyroid lattices using selective laser sintering.

Three-dimensional printing (3DP) is gaining momentum in the field of pharmaceuticals, offering innovative opportunities for medicine manufacture. Selective laser sintering (SLS) is a novel, high resolution and single-step printing technology that we have recently introduced to the pharmaceutical sciences. The aim of this work was to use SLS 3DP to fabricate printlets (3D printed tablets) with cylindrical, gyroid lattice and bi-layer structures having customisable release characteristics. Paracetamol-loaded constructs from four different pharmaceutical grade polymers including polyethylene oxide, Eudragit (L100-55 and RL) and ethyl cellulose, were created using SLS 3DP. The novel gyroid lattice structure was able to modulate the drug release from all four polymers. This work is the first to demonstrate the feasibility of using SLS to achieve customised drug release properties of several polymers, in a swift, cost-effective manner, avoiding the need to alter the formulation composition. By creating these constructs, it is therefore possible to modify drug release, which in practice, could enable the tailoring of drug performance to the patient simply by changing the 3D design.

Compacted Multiparticulate Systems for Colon-Specific Delivery of Ketoprofen.

Pellet-containing tablets for colon-specific drug delivery present higher targeting efficiency and lower costs when compared with monolithic tablets and pellet-filled capsules, respectively. In this study, pellets containing ketoprofen were coated with different acrylic polymers and submitted to compaction. The influence of formulation and process factors on film integrity was then evaluated. Pellets were prepared via extrusion-spheronization and coated using two acrylic polymers (Eudragit® FS 30 D and Opadry® 94 k28327, PMMA and PMA, respectively). The resulting pellets were mixed with placebo granules and compressed in a hydraulic press. Multiple regression showed that ketoprofen release from pellet-containing tablets is predominantly influenced by pellet content, hardness, friability, and disintegration time. PMA-containing tablets prepared under low compaction force or with low pellet content showed rapid disintegration (<1 min) and ketoprofen release similar to those of uncompressed coated pellets (∼30% at 360 min of experiment). On the other hand, PMMA-containing tablets showed a higher rupture level, and those prepared with higher pellet content gave rise to a non-disintegrating matrix. Coated pellets were shown to be able to target ketoprofen to the colonic region. Targeting capacity was dependent on the physicochemical characteristics of the tablets.

Extended release promethazine HCl using acrylic polymers by freeze-drying and spray-drying techniques: formulation considerations / Liberação prolongada prometazina HCl utilizando polímeros acrílicos por liofilização e técnicas de secagem por aspersão: consideração de formulação

The present study investigated a novel extended release system of promethazine hydrochloride (PHC) with acrylic polymers Eudragit RL100 and Eudragit S100 in different weight ratios (1:1 and 1: 5), and in combination (0.5+1.5), using freeze-drying and spray-drying techniques. Solid dispersions were characterized by Fourier-transformed infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), Powder X-ray diffractometry (PXRD), Nuclear magnetic resonance (NMR), Scanning electron microscopy (SEM), as well as solubility and in vitro dissolution studies in 0.1 N HCl (pH 1.2), double-distilled water and phosphate buffer (pH 7.4). Adsorption tests from drug solution to solid polymers were also performed. A selected solid dispersion system was developed into capsule dosage form and evaluated for in vitro dissolution studies. The progressive disappearance of drug peaks in thermotropic profiles of spray-dried dispersions were related to increasing amount of polymers, while SEM studies suggested homogenous dispersion of drug in polymer. Eudragit RL100 had a greater adsorptive capacity than Eudragit S100, and thus its combination in (0.5+1.5) for S100 and RL 100 exhibited a higher dissolution rate with 97.14 percent drug release for twelve hours. Among different formulations, capsules prepared by combination of acrylic polymers using spray-drying (1:0.5 + 1.5) displayed extended release of drug for twelve hours with 96.87 percent release followed by zero order kinetics (r²= 0.9986).

O presente trabalho compreendeu estudo de um novo sistema de liberação prolongada de cloridrato de prometazina (PHC) com polímeros acrílicos Eudragit RL100 e Eudragit S100 em diferentes proporções em massa (1:1 e 1:5) e em combinação (0,5+1,5), utilizando técnicas de liofilização e de secagem por aspersão As dispersões sólidas foram caracterizadas por espectrofotometria no infravermelho por transformada de Fourier (FT-IR), calorimetria diferencial de varredura (DSC), difratometria de raios X (PXRD), Ressonância Magnética Nuclear (RMN), microscopia eletrônica de varredura (SEM) e, também, por estudos de solubilidade e de dissolução in vitro em HCl 0,1 N (pH 1,2), água bidestilada e tampão fosfato (pH 7,4). Realizaram-se, também, testes de adsorção da solução do fármaco nos polímeros sólidos. Desenvolveu-se sistema de dispersão sólida exclusiva dentro das cápsulas, que foi avaliado por meio de estudos de dissolução in vitro. Relacionou-se o desaparecimento progressivo de picos do fármaco em perfis termotrópicos de dispersões secas por spray à quantidade aumentada de polímero, enquanto os estudos de SEM sugeriram dispersão homogênea do fármaco no polímero. O Eudragit RL100 apresentou maior capacidade de adsorção do que o Eudragit S100 e, dessa forma, a combinação de (0,5+1,5) para S100 e para RL100 mostrou taxa de dissolução maior, com liberação de 94,17 por cento de fármaco em 12 horas. Entre as várias formulações, as cápsulas preparadas pela combinação de polímeros acrílicos utilizando secagem por aspersão (0,5+1,5) apresentou liberação prolongada do fármaco em 12 horas, com 96,78 por cento de liberação, seguindo cinética de ordem zero (r² = 0,9986).